Before you start
* Obtain any Audio Equipment / Vehicle
Alarm
security codes before
disconnecting the battery.
* So's not to get locked out of your vehicle or risk damage the microchip in your
car key - make sure to remove the keys from the vehicle ignition.
* Disconnect any device that is plugged into the car cigarette lighter.
* Please consult your car handbook for any additional requirements.
* Keep curious family pets and children out of the way whilst changing your
vehicle battery!
Tools Needed : 1 x Socket Set Time Required : 10 to 15 Minutes
|
Installation
1. Remove the battery hold down / clamp. This is usually just 1 retaining bolt.
2. Disconnect the negative
battery lead first.
3. Disconnect the positive
lead.
4. Remove the old battery from the car. Put the new battery in
its place
ensuring
the battery's terminals are in the same orientation
as the old battery.
5. Connect the positive
lead securely to the new battery first.
6. Connect the negative
lead making sure it is also refitted securely.
7. Re-attach the battery hold down / clamp.
8. Re-Set any Audio Equipment / Vehicle Alarm security codes.
|
Explosion Hazard
When charging batteries a gas called
Oxyhydrogen is formed. DO-NOT smoke or expose a charging battery
to any form of spark or naked flame. Be careful of any
electrostatic discharges from any other equipment that you are using
and avoid any possible short circuits.
|
|
Please note that
Advanced Battery Supplies take no responsibility or liability for any
accident or injury that happens whilst you are installing
batteries. All of our products are thoroughly checked and tested
before dispatch. Please check your product on arrival. Any
damage to the product after receipt will void any warranty and
liability on our part.
|
|
